- Contact：Mr. Song
- Phone：0086-13705113637
- Tell：0086-0515-88809180
- Fax：0086-0515-88809181
- E-mail：jsjckt@126.com
- Address：No. 18, Rongguang Road, National High-tech Park, Yancheng City, Jiangsu Province
In order to ensure the normal use of the industrial air conditioning system, it is necessary to clean and maintain work in a timely manner. Next, it is promoted to briefly introduce the conventional cleaning method of the air -conditioning system.
Routine cleaning of industrial air conditioning :
The commonly used physical cleaning methods include hosting guns, that is, tools such as tightening air or artificially handle rods, rubber plugs, nylon brushes or round steels are inside the heating tube to remove the accumulation or infarction in the tube. Open the host cover, use a pair of copper tubes one by one with a pair of copper tubes, and clean the biological mud and rust residues on the wall of the pipe wall. At the end of the cannon, rinse it with high pressure water. Then all the rust slag and scale blocks on the side of the water chamber and the inner wall of the water are completely eliminated, and brush the rust -resistant paint twice to play a role in rust removal, rust, and staining.
The action of chemical agents is a type of cleaning method that dissolves, loose, scattered or peeled in the cleaning equipment. Commonly used chemical cleaning methods include pickling, alkaline washing, complexing agent cleaning, sterilization cleaning, etc. Chemical cleaning is generally used to remove the accumulation of hard dirt and curve, and connectors in the equipment, pipelines. Adopt a professional single -cycle cleaning method, use organic acid plus connection agent, with high -efficiency corrosion agent, the corrosion of copper tube is more than ten times lower than inorganic acid. Rust removal. After cleaning, the copper tube stops pre -film disposal, which can greatly delay the corrosion speed of the equipment.
Cleaning of air -conditioning backwind filter:
Open the suction grille, hold the two buttons, and slowly pull down at the same time, drag the hooks on the air filter to pull out the slope, remove the filter, clean the method: remove dust with a vacuum cleaner, or use water or warm water with water or warm water Washing, when the dust is too much, use a soft brush and a neutral detergent. After washing it, remove the water, and then dry it in a cool place. Remember not to use hot water above 50 ° C to avoid coloring or deformation; do not roast it on the fire, the filter may be on fire, and the air filter must be installed after cleaning. Hang the air filter on the protruding part of the inhaled grille, and then fix it on the inhaled grille; slide the convex handle on the back of the inhaled grille, install the air filter in the inhaled grille, and close the inhaled grille. On the contrary, according to the filter signal reset key on the control disk, the reminder sign of the central air -conditioning cleaning will disappear. If there is too much environmental dust, the air filter should be cleaned about once in half a year.
Industrial air conditioning, chemical fiber industrial air conditioning, chemical fiber industry refrigeration, textile industrial air conditioning, dust-free workshop cooling, ventilation pipeline, cooling tower, freezer and other air conditioning units and accessories.
Jiangsu Jincheng Air Conditioning Engineering Co., Ltd. is a comprehensive manufacturer of special air-conditioning equipment design, production, installation, and commissioning of clean room, electricity, tobacco, civil air defense engineering, medical clean room, clean room, electricity, tobacco, civil air defense engineering, medical clean room. Mainly produce JCZK combined air conditioning unit, cooling tower, glass steel ventilated galvanized sheet pipe, stainless steel pipe, polyurethane ventilation pipe and air conditioning accessories, Jincheng air conditioner is wide, the type, the unique model, superior performance, and user Favused.
