- Contact：Mr. Song
- Phone：0086-13705113637
- Tell：0086-0515-88809180
- Fax：0086-0515-88809181
- E-mail：jsjckt@126.com
- Address：No. 18, Rongguang Road, National High-tech Park, Yancheng City, Jiangsu Province
Do you know how to clean the cooling tower?
Regular cleaning of the cooling tower can effectively ensure the cooling effect of the cooling tower and also guarantee the overall operation of the refrigeration equipment. Cooling tower cleaning is so important, do you know how to clean the cooling tower?
The cleaning process is carried out when the cooling tower is stopped: water washing-sterilization and algae cleaning-cleaning agent descaling cleaning-washing after cleaning-pre-membrane-cleaning after cleaning.
Water flushing: The purpose of water flushing is to wash away loose dirt such as dust, silt, shed algae and corrosives in the system with large flow of water as much as possible. Also check the system for leaks. The flow rate of flushing water should be more than 0.15m/s. After passing the flushing, drain out the flushing water in the system.
Sterilization and algae cleaning: The purpose of sterilization and algae cleaning is to kill the microorganisms in the system and peel off the biological slime attached to the equipment surface. After draining the flushing water, add sterilization and algaecide to the system for cleaning, and stop cleaning when the turbidity of the system tends to balance.
Cleaning fluid descaling and cleaning: The purpose of cleaning fluid cleaning is to use the cleaning agent to dissolve the scale and oxides in the system and then dissolve them in water to wash them away. Add the cleaning agent to the central air-conditioning system and circulate and clean it with a circulation pump and drain it at the highest point and the lowest point of the sewage to avoid air blockage and shower blockage, which affects the cleaning effect. Rinsing after cleaning: Rinsing is to rinse off the cleaning liquid and impurities removed during cleaning. Flushing is to keep the guide shower in order to flush out the impurities and residual liquid deposited in the short tube. Flushing is to continuously test the PH value and turbidity. When the PH value and turbidity tend to be gentle, the flushing is ended.
Pre-membrane: The purpose of pre-membrane is to form a complete corrosion-resistant protective film on the metal surface in the activated state or the metal surface where the protective film is damaged after cleaning.
Cleaning after cleaning: After the cleaning is completed, the main unit cooler and evaporator should be turned on and washed with a special pipe to wash. In general, the scale of the cooler will be more serious than other places. The device is separately connected to an open circulation system for cleaning and descaling.
Cooling tower cleaning: As the cooling tower is exposed to the atmosphere, a large amount of sediment, algae, etc. will adhere to the surface of the cooling tower packing during operation. If the cleaning tower is not cleaned, these dirts will be washed into the cooler during subsequent operation to cause cooling The blockage of the heat exchange copper tube in the device affects the heat exchange effect, so the cooling tower must be thoroughly cleaned.
Jiangsu Jincheng Air Conditioning Engineering Co., Ltd. has been focusing on the design, development and production of industrial air conditioning equipment for many years. Its industrial refrigeration is widely used. The main products are: industrial air conditioning, chemical fiber industrial air conditioning, textile industrial air conditioning, chemical fiber industrial refrigeration, clean room refrigeration , Ventilation ducts, cooling towers, refrigerators and other air-conditioning units and accessories.
Jiangsu Jincheng is a rare conscience manufacturer in the industrial refrigeration industry. If you want to know more product information, please contact: Mr. Song 13705113637 Website: http://m.pc20080808.cn/
